Borofloat Glass is reviewed here as a recommended route in the application record for Machine Vision Glass Window. Suitability depends on the exact grade, wavelength or viewing duty, temperature, chemicals, pressure or impact, mounting, edge and surface specification, cleaning and system-level validation.
Machine Vision Glass Window glass processing for Borofloat Glass: Compatibility and Specification Basis
Borofloat Glass is reviewed here as a recommended route in the application record for Machine Vision Glass Window. Suitability depends on the exact grade, wavelength or viewing duty, temperature, chemicals, pressure or impact, mounting, edge and surface specification, cleaning and system-level validation.
Machine Vision Glass Window
Protect the camera and illumination path while preserving measurement contrast, focus and geometric fidelity.
Borofloat Glass
Borofloat Glass is tied to the configured V4.1 material record, but manufacturer, grade, supplied condition and certificate requirements must be stated.
Recommended route in the application record
Borofloat Glass appears in the V4.1 recommended material route for Machine Vision Glass Window, but the exact grade and assembly conditions still require validation.
Drawing and system validation
The material name does not certify the installed equipment. Grade, thickness, edge, surface, coating, mounting and service-condition validation remain project-specific.
Application Conditions That Control Material Selection
Optical, thermal, chemical, mechanical, pressure, sealing and cleaning requirements must be defined before this material route is accepted.
| Service condition | What to define |
|---|---|
| Optical or viewing requirement | Specify band, angle, transmission, reflection, wedge, transmitted wavefront, surface quality and clear aperture. |
| Temperature and thermal cycling | Camera heat and ambient cycling must not shift focus or stress the coating/mount. |
| Chemical and cleaning exposure | Define oils, coolant mist, cleaners and dust; coating and seal must survive the maintenance method. |
| Mechanical and mounting load | Window must tolerate clamp load, vibration and occasional impact without bending into the optical path. |
| Pressure or vacuum boundary | Machine Vision Window: Define when the component forms a pressure or vacuum boundary |
| Cleaning and handling | Remove dust, oil and coolant film that can create image artifacts; validate cleaning against AR/filter coatings and edge paint. |
Borofloat Glass for Machine Vision Glass Window
The V4.1 application route and the selected material record are shown separately so an unsupported combination is not presented as automatically approved.
| Decision area | Application and material basis |
|---|---|
| Compatibility status | Recommended route in the application record. Borofloat Glass appears in the V4.1 recommended material route for Machine Vision Glass Window, but the exact grade and assembly conditions still require validation. |
| Application recommended route | Low-iron glass, BOROFLOAT 33, fused silica, optical glass or filter glass selected for camera and illumination band. |
| Application alternatives | Fused silica for low distortion/UV-NIR, optical filter glass for band selection, and sapphire for harsh exposed stations. |
| Selected material capability | Optical, thermal, chemical or mechanical glass components within the cited grade limits |
| Selected material limitations | Grade, thickness, surface state, wavelength and temperature conditions must not be generalized |
| Selection evidence required | Document why Borofloat Glass is chosen for Machine Vision Glass Window, including rejected alternatives and the validation method. |
| Selected material property | Published reference |
|---|---|
| Material category | Borosilicate 3.3 |
| Thermal expansion | 3.25e-6 1/K (20 to 300 deg C; ISO 7991 reference value) |
| Service temperature | 500 deg C (Short-term use below 10 h; reference value); 450 deg C (Long-term use at or above 10 h; reference value) |
| Refractive index | 1.47140 index (587.6 nm) |
| Available forms | Sheet, plate, disc, window, tube, rod or blank where the named grade is supplied in that form |
Drawing, Processing and Assembly Definition
Phase 6I does not import generic process capability numbers. Manufacturing and acceptance remain tied to the exact grade, geometry, quantity and drawing.
| Route item | Project-specific requirement |
|---|---|
| Typical component forms | Flat protective window, wedged window, bandpass/filter window or guarded equipment panel. |
| Application process route | Precision cutting, double-side polishing, wedge control, AR/filter coating, edge blackening and clean packing. |
| Material-compatible processes | Precision cutting; CNC/ultrasonic machining where qualified; grinding; lapping; polishing; cleaning; inspection |
| Size and thickness | Thickness is set by aperture, mount and focus budget; published machining envelopes are not an imaging tolerance. |
| Edge and surface zones | Low-scatter faces, chip-free chamfers and controlled coating cosmetics; particles inside the aperture are critical. |
| Drawing release | For Machine Vision Glass Window glass processing for Borofloat Glass, identify exact grade, datums, clear aperture, mounting and sealing lands, edge profile, surface quality, coatings, quantity, inspection and packaging. |
Quality Controls for Machine Vision Glass Window glass processing for Borofloat Glass
Inspection must verify both the material-dependent characteristics and the installed application requirement.
| Risk or control | Application × material focus |
|---|---|
| Application failure modes | Ghosting, glare, distortion, focus shift, coating damage, particles and clamp-induced birefringence. |
| Material-specific limits | Grade, thickness, surface state, wavelength and temperature conditions must not be generalized |
| Inspection method | Spectral test, wedge/autocollimation, interferometry or distortion target, scratch-dig inspection and image trial. |
| Standards and system validation | ISO 10110-1/-5/-7/-8 for optical specification; camera-system resolution and lighting validation remain application tests. |
| First article | For Machine Vision Glass Window glass processing for Borofloat Glass, validate fit, optical or viewing performance, mounting, cleaning and the most critical service condition before batch release. |
| Traceability and packaging | State grade certificate, lot, inspection report, coating side, cleanliness, edge protection and packaging requirements. |
Information Needed Before Quotation
Provide the exact material grade or required properties together with application conditions and the finished-component drawing.
RFQ inputs
- Clear aperture, material/grade, wavelength, dimensions, wedge/parallelism, flatness, surface quality, coating, pressure/vacuum, temperature and seal interface
- Camera/illumination band, incidence angle, aperture, thickness, wedge, flatness, surface quality, coating and mount.
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Application and Material References
References support the separate application and material records. They do not certify this exact combination or the finished assembly.
- SCHOTT BOROFLOAT 33 Technical Dataschott.com
- UV Fused Silica High Precision WindowsThorlabs
- SCHOTT Imaging and Sensing Material RequirementsSCHOTT
- Sydor CNC Glass MachiningSydor Optics
- Optical Manufacturing CapabilitiesBond Optics
Request a Project-Specific Glass Review
Send the application conditions, material preference and drawing so the component can be reviewed against the installed function.
- Material: Borofloat Glass
- Application: Machine Vision Glass Window
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Is Borofloat Glass automatically suitable for Machine Vision Glass Window?
Borofloat Glass appears in the V4.1 recommended material route for Machine Vision Glass Window, but the exact grade and assembly conditions still require validation. For the Machine Vision Glass Window glass processing for Borofloat Glass page, final approval requires the actual grade, drawing and service-condition validation.
Which properties of Borofloat Glass matter for Machine Vision Glass Window?
For Machine Vision Glass Window glass processing for Borofloat Glass, compare transmission or viewing clarity, thermal expansion and temperature, chemical durability, hardness or impact, seal compatibility, edge strength, cleaning and the required certificate against the application duty.
Which alternatives should be compared with Borofloat Glass for Machine Vision Glass Window?
For Machine Vision Glass Window glass processing for Borofloat Glass, Low-iron glass, BOROFLOAT 33, fused silica, optical glass or filter glass selected for camera and illumination band. Record why Borofloat Glass is retained for this exact page.
How should Machine Vision Glass Window glass processing for Borofloat Glass be manufactured?
For Machine Vision Glass Window glass processing for Borofloat Glass, Precision cutting, double-side polishing, wedge control, AR/filter coating, edge blackening and clean packing. Material-compatible routes for Borofloat Glass must also be confirmed from the configured material record.
How should Machine Vision Glass Window glass processing for Borofloat Glass be inspected?
For Machine Vision Glass Window glass processing for Borofloat Glass, Spectral test, wedge/autocollimation, interferometry or distortion target, scratch-dig inspection and image trial. Include grade traceability and material-dependent acceptance for Borofloat Glass where relevant.
What should an RFQ include for Machine Vision Glass Window glass processing for Borofloat Glass?
For Machine Vision Glass Window glass processing for Borofloat Glass, Camera/illumination band, incidence angle, aperture, thickness, wedge, flatness, surface quality, coating and mount. Also state whether Borofloat Glass is mandatory or whether ANTGLASS may compare alternative materials.