Glass Plate Cutting can be reviewed for Borofloat Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Precision Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Glass Plate Cutting for Borofloat Glass
Glass Plate Cutting can be reviewed for Borofloat Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Precision Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Borofloat Glass
Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements
Glass Plate Cutting
Glass Plate Cutting is represented by the broader precision glass cutting record; transfer any numeric reference only under the stated material and geometry conditions.
Drawing-defined feasibility
Final capability is reviewed against grade, supplied form, thickness, geometry, edge distance, finish, tolerance, quantity and inspection method.
How the Process and Glass Type Interact
The table separates verified process or material records from project-specific items that still require drawing review.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Precision Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Material or functional basis | Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements |
| Input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| High-risk condition | Thin, brittle, strengthened, crystalline or coated parts require grade- and geometry-specific qualification |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
BOROFLOAT 33 Properties Relevant to Glass Plate Cutting
Published values retain their grade and source conditions. They are not automatic finished-part guarantees.
| Material property | Published reference |
|---|---|
| Material category | Borosilicate 3.3 |
| Thermal expansion | 3.25e-6 1/K (20 to 300 deg C; ISO 7991 reference value) |
| Service temperature | 500 deg C (Short-term use below 10 h; reference value); 450 deg C (Long-term use at or above 10 h; reference value) |
| Refractive index | 1.47140 index (587.6 nm) |
| Available forms | Sheet, plate, disc, window, tube, rod or blank where the named grade is supplied in that form |
Precision Glass Cutting References and Design Limits
Numeric values are displayed only when an exact or accepted process-family record has verified public evidence. Proxy-family pages suppress numeric ranges and remain drawing-review pages.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Maximum Thickness | up to 10 mm | Blade dicing reference for flat substrates |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | up to 10 mm |
| Tooling and process condition | 0.01 to 0.05 mm; DISCO describes a synthetic-diamond abrasive blade with an outer diameter around 50 mm.; 50 µm to 10 mm; 50 µm to 50 mm; DISCO separates glass laser processing into continuous-wave and pulsed operation. 0.1 mm to 12 in mixed |
| Drawing review | For Glass Plate Cutting on Borofloat Glass, identify datums, critical features, edge and surface zones, coating sides, inspection method and quantity. |
Inspection Focus for Borofloat Glass Glass Plate Cutting Feasibility Review
Acceptance should connect the drawing characteristic to a measurement method, fixture condition and stated limit.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Large-area bow, thermal gradient, unsupported span, corner stress and damage at cutouts |
| Product inspection | Length/width/thickness inspection, flatness map, edge microscopy, hole location check and cosmetic transmission inspection |
| Application failure modes | Chemical etching, thermal shock, path contamination, tube-end chips and seal leakage. |
| Application inspection | Dimensions, visual cleanliness, spectral baseline, leak test where fluidic and thermal-cycle validation. |
Information Needed Before Quotation
Use the drawing to define the exact material, process feature, tolerance, edge and surface acceptance criteria.
RFQ inputs
- Material/grade, length, width, thickness, flatness, hole/cutout geometry, edge finish, strengthening state, temperature and mounting support
- Sample/reagent, temperature, pressure, wavelength/path, geometry, ports, edge, cleaning and packaging.
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Material and Process References
References support the assigned records but do not replace an approved part drawing, first-article result or production specification.
- SCHOTT BOROFLOAT 33 Technical Data schott.com
- DISCO Glass Blade Dicing glass-kakou.disco.co.jp
- Custom Glass Cutting Swift Glass
- DISCO Glass Laser Cutting glass-kakou.disco.co.jp
- Valley Design Optical Polishing, Lapping, Dicing and Machining Valley Design
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Glass Plate Cutting
- Material: Borofloat Glass
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Is Glass Plate Cutting suitable for Borofloat Glass on Borofloat Glass Glass Plate Cutting Feasibility Review?
Glass Plate Cutting can be reviewed for Borofloat Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Precision Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Which material details must be confirmed before Glass Plate Cutting for Borofloat Glass?
For Borofloat Glass Glass Plate Cutting Feasibility Review, material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Which geometry details control Glass Plate Cutting for Borofloat Glass?
For Borofloat Glass Glass Plate Cutting Feasibility Review, define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method.
Can published process values be used as guaranteed tolerances for Borofloat Glass Glass Plate Cutting Feasibility Review?
For Borofloat Glass Glass Plate Cutting Feasibility Review, no. Published values remain reference conditions. The accepted tolerance depends on the exact material grade, thickness, geometry, datum scheme, edge and surface requirement, quantity and inspection method.
Which defects and inspection checks matter after Glass Plate Cutting on Borofloat Glass?
For Borofloat Glass Glass Plate Cutting Feasibility Review, chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable.
What should an RFQ include for Borofloat Glass Glass Plate Cutting Feasibility Review?
For Borofloat Glass Glass Plate Cutting Feasibility Review, material/grade, length, width, thickness, flatness, hole/cutout geometry, edge finish, strengthening state, temperature and mounting support Sample/reagent, temperature, pressure, wavelength/path, geometry, ports, edge, cleaning and packaging.