Water Jet Glass Cutting can be reviewed for Borosilicate Glass Disc, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Solid round disc, annulus, center-hole disc, multi-hole disc or stepped disc.
How Water Jet Glass Cutting Applies to Borosilicate Glass Disc
Water Jet Glass Cutting can be reviewed for Borosilicate Glass Disc, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Solid round disc, annulus, center-hole disc, multi-hole disc or stepped disc.
Borosilicate Glass Disc
Solid round disc, annulus, center-hole disc, multi-hole disc or stepped disc
Water Jet Glass Cutting
Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Feature-specific approval
Tool access, wall section, edge distance, finish, datums, tolerance and inspection method must be approved for the actual drawing.
Compatibility Between the Product Geometry and Process Route
The review separates the intended operation from product-family assumptions and drawing-specific constraints.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Product geometry | Solid round disc, annulus, center-hole disc, multi-hole disc or stepped disc |
| Typical input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Borosilicate Glass Disc Features That Affect the Process
Product-form records describe typical geometry and inspection needs; the supplied glass grade and drawing remain controlling inputs.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Solid round disc, annulus, center-hole disc, multi-hole disc or stepped disc |
| Dimensions and thickness | 6.35–304.8 mm published circle-grinding diameter range; larger discs require route review |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Seamed, ground, pencil-ground, polished or chamfered according to mounting and handling risk |
| Inspection | Diameter and thickness measurement, concentricity/runout check, edge microscopy, transmitted-light cosmetic inspection and flatness when functional |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
Water Jet Glass Cutting References and Design Limits
Numeric values appear only when verified public process evidence is assigned. Proxy-family pages intentionally suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.1 mm | Swift waterjet reference |
| Maximum Thickness | 304.8 mm | Swift waterjet reference converted from 12 in |
| Dimensional Tolerance | ±0.254 mm | Swift standard waterjet precision converted from ±0.01 in |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.1 mm 304.8 mm |
| Tooling and process condition | 2 to 3 axes; OMAX states LAYOUT creates toolpaths and MAKE controls nozzle motion, abrasive and high-pressure water. 0.1 mm to 12 in mixed; Swift publishes a standard waterjet precision tolerance of ±0.01 inch. in; 2 to 3 axes; OMAX states abrasive waterjet has a thin kerf suited to intricate patterns. |
| Tolerance and finish | ±0.254 mm |
| Drawing review | For Water Jet Glass Cutting on Borosilicate Glass Disc, identify the glass grade, datums, processed features, edge and surface zones, quantity and inspection method. |
Inspection Focus for Borosilicate Glass Disc Water Jet Glass Cutting
Inspect the processed feature together with adjacent edges, surfaces, wall sections and functional zones.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Center-hole breakout, edge chips, wedge, mounting point load and thermal-gradient fracture |
| Product inspection | Diameter and thickness measurement, concentricity/runout check, edge microscopy, transmitted-light cosmetic inspection and flatness when functional |
| Acceptance method | Scratch-Dig Inspection: Compare calibrated result with the drawing, purchase order or approved test specification |
Information Needed Before Quotation
Provide the glass grade, supplied form, dimensions, feature location, edge and surface requirements, quantity and inspection method.
RFQ inputs
- Material grade, diameter, thickness, hole pattern, edge finish, flatness or wedge, surface quality, coating, operating temperature and packaging
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Product and Process References
References support the assigned records but do not replace a drawing-specific feasibility review or approved first article.
- Qingdao Huiyang High Borosilicate Glass 3.3ssmglass.com
- Custom Glass CuttingSwift Glass
- Cutting Glass with WaterjetFlow Waterjet
- GlobalMAX HelpOMAX
- Glass Processing OptionsSCHOTT
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Water Jet Glass Cutting
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can Water Jet Glass Cutting be used for Borosilicate Glass Disc in Borosilicate Glass Disc Water Jet Glass Cutting?
Water Jet Glass Cutting can be reviewed for Borosilicate Glass Disc, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Solid round disc, annulus, center-hole disc, multi-hole disc or stepped disc.
Which product features affect Water Jet Glass Cutting for Borosilicate Glass Disc Water Jet Glass Cutting?
For Borosilicate Glass Disc Water Jet Glass Cutting, thickness, feature size, edge distance, wall section, internal radii, tool access, datums and protected surfaces can change the accepted process route.
Are the process values on Borosilicate Glass Disc Water Jet Glass Cutting guaranteed finished-part limits?
No. For Borosilicate Glass Disc Water Jet Glass Cutting, published process references retain their material and geometry conditions; the quotation and approved drawing define the finished-part acceptance limits.
Which defects should be checked after Water Jet Glass Cutting on Borosilicate Glass Disc?
For Borosilicate Glass Disc Water Jet Glass Cutting, inspect feature position and size together with chips, cracks, breakout, edge condition, scratches, contamination and adjacent-wall damage.
How should Borosilicate Glass Disc Water Jet Glass Cutting be inspected?
For Borosilicate Glass Disc Water Jet Glass Cutting, connect each critical drawing characteristic to an agreed instrument, datum, fixture condition, sampling plan and numeric acceptance limit.
What should an RFQ include for Borosilicate Glass Disc Water Jet Glass Cutting?
For Borosilicate Glass Disc Water Jet Glass Cutting, material grade, diameter, thickness, hole pattern, edge finish, flatness or wedge, surface quality, coating, operating temperature and packaging.