UV Glass can be supplied and processed as Sensor Window when the exact grade or functional material duty, stock form, dimensions, thickness, edge and surface requirements are defined by the drawing. The assigned material or application record notes: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements. The assigned product record adds: Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover.
Can UV Glass Be Used for Sensor Window?
UV Glass can be supplied and processed as Sensor Window when the exact grade or functional material duty, stock form, dimensions, thickness, edge and surface requirements are defined by the drawing. The assigned material or application record notes: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements. The assigned product record adds: Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover.
UV Glass
Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements
Sensor Window
Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover
Drawing-defined feasibility
Final feasibility is reviewed against grade, supplied stock, dimensions, thickness, holes, cutouts, edges, surfaces, quantity and inspection criteria.
How the Glass Type and Product Form Fit Together
The assigned technical records separate published material or application guidance from the dimensions and acceptance criteria that remain drawing-specific.
| Review area | Assigned technical basis |
|---|---|
| Material definition | Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements |
| Product-form definition | Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover |
| Typical materials | Borosilicate, alkali-free glass, fused silica, sapphire, filter glass, silicon or germanium according to sensor band |
| Application duty | Transmit the sensor band while protecting the detector or MEMS element from moisture, chemicals, particles and impact. |
| Inspection basis | Spectral/angular transmission, surface quality, dimensions/TTV, coating adhesion and environmental seal testing |
UV Grade Fused Silica Properties Relevant to This Product Form
Published values retain their grade and source conditions. Finished-part behavior also depends on geometry, machining, edge condition and assembly.
| Material property | Published reference |
|---|---|
| Material category | UV-grade fused silica |
| Transmission range | 193 nm ArF lithography grade; full curve is grade- and thickness-specific |
| Available forms | Sheet, plate, disc, window, tube, rod or blank where the named grade is supplied in that form |
Geometry, Surface and Inspection Requirements
Product-family data is a planning reference. The drawing must identify the exact shape, critical zones and measurable acceptance limits.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover |
| Dimensions and thickness | Package-scale windows through larger LiDAR covers; housing aperture and field of view govern |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Fine ground/chamfered outside clear aperture; sealing edge matched to hermetic or adhesive process |
| Inspection | Spectral/angular transmission, surface quality, dimensions/TTV, coating adhesion and environmental seal testing |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
| Manufacturing route item | Review requirement |
|---|---|
| Supplied stock | Sheet, plate, disc, window, tube, rod or blank where the named grade is supplied in that form |
| Compatible route | Precision cutting; CNC/ultrasonic machining where qualified; grinding; lapping; polishing; cleaning; inspection |
| High-risk geometry | Use grade-specific laser-damage, homogeneity and transmission data; do not substitute general fused-silica values |
| Drawing release | For UV Glass Sensor Window, define datums, critical features, edge and surface zones, quantity, inspection and packaging before releasing the route. |
Inspection Focus for Custom UV Glass Sensor Window Processing
Acceptance should connect every critical drawing characteristic to an instrument, fixture condition and stated limit.
| Review item | Project-specific focus |
|---|---|
| Product design risk | Wrong band material, angular spectral shift, humidity ingress, coating damage and housing-induced stress |
| Product inspection | Spectral/angular transmission, surface quality, dimensions/TTV, coating adhesion and environmental seal testing |
| Application failure modes | Wrong spectral glass, coating shift, moisture ingress, seal fracture, fogging and housing-induced stress. |
| Application inspection | Spectral/angular transmission, dimensions/TTV, surface quality, coating adhesion and environmental leak testing. |
| Acceptance method | Transmittance Measurement: Compare calibrated result with the drawing, purchase order or approved test specification |
| Feature-to-edge damage | For Custom UV Glass Sensor Window Processing, inspect chips, microcracks, breakouts and edge damage around processed features and adjacent walls. |
Information Needed Before Quotation
State the exact material grade or selection duty, stock form, dimensions, tolerance, edge and surface zones, quantity and inspection documentation.
RFQ inputs
- Sensor band/angle, clear aperture, substrate, thickness, wedge/flatness, coating, seal method, environment, impact and cleanliness
- Sensor type, band/angle, aperture, material, thickness, coating, seal, environment, impact and cleanliness.
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Material, Product and Application References
References support the assigned records but do not replace an approved drawing, first-article result or application qualification.
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Material: UV Glass
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can UV Glass be made as Sensor Window for Custom UV Glass Sensor Window Processing?
UV Glass can be supplied and processed as Sensor Window when the exact grade or functional material duty, stock form, dimensions, thickness, edge and surface requirements are defined by the drawing. The assigned material or application record notes: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements. The assigned product record adds: Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover.
Which material-grade details are needed for Custom UV Glass Sensor Window Processing?
For Custom UV Glass Sensor Window Processing, name the exact grade or provide the temperature, pressure, chemical, optical, sealing, cleaning and wear conditions needed to select it.
Which dimensions and features control Custom UV Glass Sensor Window Processing?
For Custom UV Glass Sensor Window Processing, define outer dimensions, thickness, OD and ID where relevant, holes, slots, cutouts, steps, radii, edge distances, datums and critical surfaces.
How is the manufacturing route selected for Custom UV Glass Sensor Window Processing?
For Custom UV Glass Sensor Window Processing, the route is selected from the glass grade, supplied stock, geometry, edge and surface requirements, quantity and inspection method rather than from the product name alone.
Which quality checks matter for Custom UV Glass Sensor Window Processing?
For Custom UV Glass Sensor Window Processing, inspect dimensions, chips, cracks, edge condition, scratches, contamination and any optical, sealing or application-specific characteristic stated on the drawing.
What should an RFQ include for Custom UV Glass Sensor Window Processing?
For Custom UV Glass Sensor Window Processing, sensor band/angle, clear aperture, substrate, thickness, wedge/flatness, coating, seal method, environment, impact and cleanliness Sensor type, band/angle, aperture, material, thickness, coating, seal, environment, impact and cleanliness.