Water Jet Glass Cutting can be reviewed for Float Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Water Jet Glass Cutting for Float Glass
Water Jet Glass Cutting can be reviewed for Float Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Float Glass
Float Glass is represented by the assigned soda-lime float family record for planning only. Confirm the actual float-glass grade and supplier specification.
Water Jet Glass Cutting
Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Drawing-defined feasibility
Final capability is reviewed against grade, supplied form, thickness, geometry, edge distance, finish, tolerance, quantity and inspection method.
How the Process and Glass Type Interact
The table separates verified process or material records from project-specific items that still require drawing review.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Material or functional basis | Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements |
| Input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| High-risk condition | Thin, brittle, strengthened, crystalline or coated parts require grade- and geometry-specific qualification |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Soda Lime Glass Properties Relevant to Water Jet Glass Cutting
Published values retain their grade and source conditions. They are not automatic finished-part guarantees.
| Material property | Published reference |
|---|---|
| Material category | Soda-lime silicate |
| Thermal expansion | 8.3e-6 1/K (75 to 575 deg F) |
| Available forms | Sheet, plate, disc, window, tube, rod or blank where the named grade is supplied in that form |
Waterjet Glass Cutting References and Design Limits
Numeric values are displayed only when an exact or accepted process-family record has verified public evidence. Proxy-family pages suppress numeric ranges and remain drawing-review pages.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.1 mm | Swift waterjet reference |
| Maximum Thickness | 304.8 mm | Swift waterjet reference converted from 12 in |
| Dimensional Tolerance | ±0.254 mm | Swift standard waterjet precision converted from ±0.01 in |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.1 mm 304.8 mm |
| Tooling and process condition | 2 to 3 axes; OMAX states LAYOUT creates toolpaths and MAKE controls nozzle motion, abrasive and high-pressure water. 0.1 mm to 12 in mixed; Swift publishes a standard waterjet precision tolerance of ±0.01 inch. in; 2 to 3 axes; OMAX states abrasive waterjet has a thin kerf suited to intricate patterns. |
| Tolerance and finish | ±0.254 mm |
| Drawing review | For Water Jet Glass Cutting on Float Glass, identify datums, critical features, edge and surface zones, coating sides, inspection method and quantity. |
Inspection Focus for Float Glass Water Jet Glass Cutting Feasibility Review
Acceptance should connect the drawing characteristic to a measurement method, fixture condition and stated limit.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Acceptance method | Microscopic Edge Inspection: Compare calibrated result with the drawing, purchase order or approved test specification |
Information Needed Before Quotation
Use the drawing to define the exact material, process feature, tolerance, edge and surface acceptance criteria.
RFQ inputs
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Material and Process References
References support the assigned records but do not replace an approved part drawing, first-article result or production specification.
- Properties of Soda-Lime Silica Float Glass Pilkington
- Pilkington Optifloat Clear Pilkington
- Custom Glass Cutting Swift Glass
- Cutting Glass with Waterjet Flow Waterjet
- GlobalMAX Help OMAX
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Water Jet Glass Cutting
- Material: Float Glass
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Is Water Jet Glass Cutting suitable for Float Glass on Float Glass Water Jet Glass Cutting Feasibility Review?
Water Jet Glass Cutting can be reviewed for Float Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Waterjet Glass Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Which material details must be confirmed before Water Jet Glass Cutting for Float Glass?
For Float Glass Water Jet Glass Cutting Feasibility Review, float Glass is represented by the assigned soda-lime float family record for planning only. Confirm the actual float-glass grade and supplier specification.
Which geometry details control Water Jet Glass Cutting for Float Glass?
For Float Glass Water Jet Glass Cutting Feasibility Review, define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method.
Can published process values be used as guaranteed tolerances for Float Glass Water Jet Glass Cutting Feasibility Review?
For Float Glass Water Jet Glass Cutting Feasibility Review, no. Published values remain reference conditions. The accepted tolerance depends on the exact material grade, thickness, geometry, datum scheme, edge and surface requirement, quantity and inspection method.
Which defects and inspection checks matter after Water Jet Glass Cutting on Float Glass?
For Float Glass Water Jet Glass Cutting Feasibility Review, chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable.
What should an RFQ include for Float Glass Water Jet Glass Cutting Feasibility Review?
For Float Glass Water Jet Glass Cutting Feasibility Review, provide the material or grade, drawing revision, dimensions, quantity, tolerances, critical surfaces, service conditions and required inspection record.