CNC Glass Machining can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: CNC Glass Machining: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
How CNC Glass Machining Applies to Glass Capillary
CNC Glass Machining can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: CNC Glass Machining: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
Glass Capillary
Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment
CNC Glass Machining
CNC Glass Machining: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Feature-specific approval
Tool access, wall section, edge distance, finish, datums, tolerance and inspection method must be approved for the actual drawing.
Compatibility Between the Product Geometry and Process Route
The review separates the intended operation from product-family assumptions and drawing-specific constraints.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | CNC Glass Machining: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Product geometry | Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment |
| Typical input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Glass Capillary Features That Affect the Process
Product-form records describe typical geometry and inspection needs; the supplied glass grade and drawing remain controlling inputs.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment |
| Dimensions and thickness | DURAN tubing 3–465 mm OD and 600–10,000 mm supply length; calibrated tube programs cite 0.4–250 mm diameter |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Saw cut, fire polished, ground square, chamfered or ground-and-chamfered |
| Inspection | OD/ID metrology, wall and ovality measurement, end squareness, bore visual inspection and leak test when assembled |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
CNC Glass Machining References and Design Limits
Numeric values appear only when verified public process evidence is assigned. Proxy-family pages intentionally suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.76 mm | JNS/Abrisa CNC fabrication program |
| Maximum Thickness | >25.4 mm | JNS/Abrisa CNC fabrication program; upper limit stated as greater than 25.4 mm |
| Minimum Part Size | 50.8 x 50.8 mm | CNC program; workholding may require larger size for individual features |
| Maximum Part Size | 2286 x 1524 mm | CNC program envelope |
| Minimum Hole Diameter | 0.76 mm | JNS/Abrisa CNC fabrication program; applies to the published CNC hole capability only |
| Dimensional Tolerance | ±0.508 mm general; up to ±0.127 mm | Provider CNC program; feature, material and size dependent |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.76 mm >25.4 mm 50.8 x 50.8 mm 2286 x 1524 mm |
| Feature size | 0.76 mm |
| Tooling and process condition | Valley describes 3-, 4- and 5-axis CNC machining services for precision material processing. |
| Tolerance and finish | ±0.508 mm general; up to ±0.127 mm |
| Drawing review | For CNC Glass Machining on Glass Capillary, identify the glass grade, datums, processed features, edge and surface zones, quantity and inspection method. |
Inspection Focus for Glass Capillary CNC Glass Machining
Inspect the processed feature together with adjacent edges, surfaces, wall sections and functional zones.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | End chips, ovality, thin wall at side ports, fire-polish distortion and chemical attack |
| Product inspection | OD/ID metrology, wall and ovality measurement, end squareness, bore visual inspection and leak test when assembled |
| Acceptance method | Microscopic Edge Inspection: Compare calibrated result with the drawing, purchase order or approved test specification |
Information Needed Before Quotation
Provide the glass grade, supplied form, dimensions, feature location, edge and surface requirements, quantity and inspection method.
RFQ inputs
- Glass grade, OD, ID/wall, length, straightness, end finish, side features, pressure/temperature, medium, cleanliness and packaging
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Product and Process References
References support the assigned records but do not replace a drawing-specific feasibility review or approved first article.
- JNS CNC Glass Machining, Drilling, Slotting and GroovingJNS Glass
- Sydor CNC Glass MachiningSydor Optics
- Valley Design CNC Glass Machining ServicesValley Design
- Abrisa Glass Machining CapabilitiesAbrisa Technologies
- SCHOTT DURAN Tubing Rods and Capillariesschott.com
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: CNC Glass Machining
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can CNC Glass Machining be used for Glass Capillary in Glass Capillary CNC Glass Machining?
CNC Glass Machining can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: CNC Glass Machining: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
Which product features affect CNC Glass Machining for Glass Capillary CNC Glass Machining?
For Glass Capillary CNC Glass Machining, thickness, feature size, edge distance, wall section, internal radii, tool access, datums and protected surfaces can change the accepted process route.
Are the process values on Glass Capillary CNC Glass Machining guaranteed finished-part limits?
No. For Glass Capillary CNC Glass Machining, published process references retain their material and geometry conditions; the quotation and approved drawing define the finished-part acceptance limits.
Which defects should be checked after CNC Glass Machining on Glass Capillary?
For Glass Capillary CNC Glass Machining, inspect feature position and size together with chips, cracks, breakout, edge condition, scratches, contamination and adjacent-wall damage.
How should Glass Capillary CNC Glass Machining be inspected?
For Glass Capillary CNC Glass Machining, connect each critical drawing characteristic to an agreed instrument, datum, fixture condition, sampling plan and numeric acceptance limit.
What should an RFQ include for Glass Capillary CNC Glass Machining?
For Glass Capillary CNC Glass Machining, glass grade, OD, ID/wall, length, straightness, end finish, side features, pressure/temperature, medium, cleanliness and packaging.