Glass Edge Polishing can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Edge Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
How Glass Edge Polishing Applies to Glass Capillary
Glass Edge Polishing can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Edge Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
Glass Capillary
Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment
Glass Edge Polishing
Glass Edge Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Feature-specific approval
Tool access, wall section, edge distance, finish, datums, tolerance and inspection method must be approved for the actual drawing.
Compatibility Between the Product Geometry and Process Route
The review separates the intended operation from product-family assumptions and drawing-specific constraints.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Glass Edge Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Product geometry | Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment |
| Typical input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Glass Capillary Features That Affect the Process
Product-form records describe typical geometry and inspection needs; the supplied glass grade and drawing remain controlling inputs.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment |
| Dimensions and thickness | DURAN tubing 3–465 mm OD and 600–10,000 mm supply length; calibrated tube programs cite 0.4–250 mm diameter |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Saw cut, fire polished, ground square, chamfered or ground-and-chamfered |
| Inspection | OD/ID metrology, wall and ovality measurement, end squareness, bore visual inspection and leak test when assembled |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
Glass Edge Polishing References and Design Limits
Numeric values appear only when verified public process evidence is assigned. Proxy-family pages intentionally suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.813 mm | Abrisa edge grinding/polishing program |
| Maximum Thickness | 50.8 mm | Abrisa edge grinding/polishing program |
| Minimum Part Size | 19.05 x 19.05 mm | Converted from the source imperial value 0.75 x 0.75 in; the source page metric text is inconsistent |
| Maximum Part Size | 533 x 533 mm | Abrisa edge grinding/polishing program |
| Dimensional Tolerance | ±0.254 mm; up to ±0.05 mm for parts 127 x 127 mm or smaller | Abrisa edge program |
| Parallelism | ±0.0127 mm | Swift edge-finishing equipment; converted from 0.0005 in |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.813 mm 50.8 mm 19.05 x 19.05 mm 533 x 533 mm |
| Tolerance and finish | ±0.254 mm; up to ±0.05 mm for parts 127 x 127 mm or smaller Swift describes smooth matte and optically clear high-gloss edge-finish options. Swift describes smooth matte and optically clear high-gloss edge-finish options. |
| Drawing review | For Glass Edge Polishing on Glass Capillary, identify the glass grade, datums, processed features, edge and surface zones, quantity and inspection method. |
Inspection Focus for Glass Capillary Edge Polishing
Inspect the processed feature together with adjacent edges, surfaces, wall sections and functional zones.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | End chips, ovality, thin wall at side ports, fire-polish distortion and chemical attack |
| Product inspection | OD/ID metrology, wall and ovality measurement, end squareness, bore visual inspection and leak test when assembled |
| Acceptance method | Microscopic Edge Inspection: Compare calibrated result with the drawing, purchase order or approved test specification |
Information Needed Before Quotation
Provide the glass grade, supplied form, dimensions, feature location, edge and surface requirements, quantity and inspection method.
RFQ inputs
- Glass grade, OD, ID/wall, length, straightness, end finish, side features, pressure/temperature, medium, cleanliness and packaging
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Product and Process References
References support the assigned records but do not replace a drawing-specific feasibility review or approved first article.
- Edge Grinding and PolishingSwift Glass
- Precision Drilling and MillingVitrum Glass Group
- Valley Design CNC Glass Machining ServicesValley Design
- Abrisa Glass Machining CapabilitiesAbrisa Technologies
- Valley Design Optical Polishing, Lapping, Dicing and MachiningValley Design
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Glass Edge Polishing
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can Glass Edge Polishing be used for Glass Capillary in Glass Capillary Edge Polishing?
Glass Edge Polishing can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Edge Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
Which product features affect Glass Edge Polishing for Glass Capillary Edge Polishing?
For Glass Capillary Edge Polishing, thickness, feature size, edge distance, wall section, internal radii, tool access, datums and protected surfaces can change the accepted process route.
Are the process values on Glass Capillary Edge Polishing guaranteed finished-part limits?
No. For Glass Capillary Edge Polishing, published process references retain their material and geometry conditions; the quotation and approved drawing define the finished-part acceptance limits.
Which defects should be checked after Glass Edge Polishing on Glass Capillary?
For Glass Capillary Edge Polishing, inspect feature position and size together with chips, cracks, breakout, edge condition, scratches, contamination and adjacent-wall damage.
How should Glass Capillary Edge Polishing be inspected?
For Glass Capillary Edge Polishing, connect each critical drawing characteristic to an agreed instrument, datum, fixture condition, sampling plan and numeric acceptance limit.
What should an RFQ include for Glass Capillary Edge Polishing?
For Glass Capillary Edge Polishing, glass grade, OD, ID/wall, length, straightness, end finish, side features, pressure/temperature, medium, cleanliness and packaging.