Optical Glass Polishing can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Optical Glass Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
How Optical Glass Polishing Applies to Glass Capillary
Optical Glass Polishing can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Optical Glass Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
Glass Capillary
Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment
Optical Glass Polishing
Optical Glass Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Feature-specific approval
Tool access, wall section, edge distance, finish, datums, tolerance and inspection method must be approved for the actual drawing.
Compatibility Between the Product Geometry and Process Route
The review separates the intended operation from product-family assumptions and drawing-specific constraints.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Optical Glass Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Product geometry | Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment |
| Typical input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Glass Capillary Features That Affect the Process
Product-form records describe typical geometry and inspection needs; the supplied glass grade and drawing remain controlling inputs.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment |
| Dimensions and thickness | DURAN tubing 3–465 mm OD and 600–10,000 mm supply length; calibrated tube programs cite 0.4–250 mm diameter |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Saw cut, fire polished, ground square, chamfered or ground-and-chamfered |
| Inspection | OD/ID metrology, wall and ovality measurement, end squareness, bore visual inspection and leak test when assembled |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
Optical Glass Polishing References and Design Limits
Numeric values appear only when verified public process evidence is assigned. Proxy-family pages intentionally suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Maximum Part Size | Ø650 mm or 350 x 350 mm | Sydor pitch-polishing manufacturing limits |
| Flatness | 1/20 wave | Reflected wavefront error before coating; clear aperture/wavelength required |
| Parallelism | ≤5 arc seconds | Sydor pitch-polishing manufacturing limits |
| Surface Roughness | 3 Å RMS | Sydor pitch-polishing manufacturing limit; source uses ≥ symbol in table presentation, treat as published nominal capability reference |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | Ø650 mm or 350 x 350 mm |
| Tooling and process condition | Bond Optics describes custom continuous-polishing machines and proprietary processes developed over more than six decades. years |
| Drawing review | For Optical Glass Polishing on Glass Capillary, identify the glass grade, datums, processed features, edge and surface zones, quantity and inspection method. |
Inspection Focus for Glass Capillary Optical Glass Polishing
Inspect the processed feature together with adjacent edges, surfaces, wall sections and functional zones.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | End chips, ovality, thin wall at side ports, fire-polish distortion and chemical attack |
| Product inspection | OD/ID metrology, wall and ovality measurement, end squareness, bore visual inspection and leak test when assembled |
| Acceptance method | Microscopic Edge Inspection: Compare calibrated result with the drawing, purchase order or approved test specification |
Information Needed Before Quotation
Provide the glass grade, supplied form, dimensions, feature location, edge and surface requirements, quantity and inspection method.
RFQ inputs
- Glass grade, OD, ID/wall, length, straightness, end finish, side features, pressure/temperature, medium, cleanliness and packaging
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Product and Process References
References support the assigned records but do not replace a drawing-specific feasibility review or approved first article.
- SCHOTT Optical Glass Pocket Catalogmedia.schott.com
- N-ZK7 Optical GlassSCHOTT
- Valley Design Optical Polishing, Lapping, Dicing and MachiningValley Design
- Optical Manufacturing CapabilitiesBond Optics
- Surface Lapping and PolishingSwift Glass
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Optical Glass Polishing
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can Optical Glass Polishing be used for Glass Capillary in Glass Capillary Optical Glass Polishing?
Optical Glass Polishing can be reviewed for Glass Capillary, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Optical Glass Polishing: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Straight tube, capillary, sleeve, calibrated bore, side-hole tube or cut segment.
Which product features affect Optical Glass Polishing for Glass Capillary Optical Glass Polishing?
For Glass Capillary Optical Glass Polishing, thickness, feature size, edge distance, wall section, internal radii, tool access, datums and protected surfaces can change the accepted process route.
Are the process values on Glass Capillary Optical Glass Polishing guaranteed finished-part limits?
No. For Glass Capillary Optical Glass Polishing, published process references retain their material and geometry conditions; the quotation and approved drawing define the finished-part acceptance limits.
Which defects should be checked after Optical Glass Polishing on Glass Capillary?
For Glass Capillary Optical Glass Polishing, inspect feature position and size together with chips, cracks, breakout, edge condition, scratches, contamination and adjacent-wall damage.
How should Glass Capillary Optical Glass Polishing be inspected?
For Glass Capillary Optical Glass Polishing, connect each critical drawing characteristic to an agreed instrument, datum, fixture condition, sampling plan and numeric acceptance limit.
What should an RFQ include for Glass Capillary Optical Glass Polishing?
For Glass Capillary Optical Glass Polishing, glass grade, OD, ID/wall, length, straightness, end finish, side features, pressure/temperature, medium, cleanliness and packaging.