Glass Drilling can be reviewed for Glass Cell Window, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Round, square, rectangular, wedged, stepped, flanged or drilled window.
How Glass Drilling Applies to Glass Cell Window
Glass Drilling can be reviewed for Glass Cell Window, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Round, square, rectangular, wedged, stepped, flanged or drilled window.
Glass Cell Window
Round, square, rectangular, wedged, stepped, flanged or drilled window
Glass Drilling
Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Feature-specific approval
Tool access, wall section, edge distance, finish, datums, tolerance and inspection method must be approved for the actual drawing.
Compatibility Between the Product Geometry and Process Route
The review separates the intended operation from product-family assumptions and drawing-specific constraints.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Product geometry | Round, square, rectangular, wedged, stepped, flanged or drilled window |
| Typical input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Glass Cell Window Features That Affect the Process
Product-form records describe typical geometry and inspection needs; the supplied glass grade and drawing remain controlling inputs.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Round, square, rectangular, wedged, stepped, flanged or drilled window |
| Dimensions and thickness | Small sensor windows through CNC rectangles up to 600 × 1000 mm supplier reference limits |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Fine ground, seamed, polished or chamfered; pressure and optical windows need controlled edge damage |
| Inspection | CMM or optical comparator, autocollimator or interferometer, transmitted-wavefront test, scratch-dig inspection and spectral test |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
Glass Drilling References and Design Limits
Numeric values appear only when verified public process evidence is assigned. Proxy-family pages intentionally suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.76 mm | CNC drilling program |
| Maximum Thickness | >25.4 mm | CNC drilling program |
| Minimum Part Size | 50.8 x 50.8 mm | CNC program; smaller parts need dedicated holding |
| Maximum Part Size | 2286 x 1524 mm | CNC program envelope |
| Minimum Hole Diameter | 0.5 mm | SCHOTT special drilling process range 0.5-40 mm |
| Maximum Hole Diameter | 300 mm | SCHOTT standard flat-glass hole range 3.5-300 mm |
| Minimum Edge Distance | greater of 2 x glass thickness or 1.5 x hole diameter, capped at 50 mm for holes up to 60 mm | SCHOTT processed-flat-glass design table |
| Dimensional Tolerance | ±0.508 mm general; up to ±0.127 mm | JNS/Abrisa CNC drilling program |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.76 mm >25.4 mm 50.8 x 50.8 mm 2286 x 1524 mm |
| Feature size | 0.5 mm |
| Edge distance and wall section | greater of 2 x glass thickness or 1.5 x hole diameter, capped at 50 mm for holes up to 60 mm |
| Tooling and process condition | Cat-i states that its glass drilling techniques include diamond tooling and high-pressure abrasive methods.; Vitrum states that its CNC fabrication machine drills, mills, polishes and cuts holes and notches. |
| Tolerance and finish | ±0.508 mm general; up to ±0.127 mm |
| Drawing review | For Glass Drilling on Glass Cell Window, identify the glass grade, datums, processed features, edge and surface zones, quantity and inspection method. |
Inspection Focus for Glass Cell Window Drilling
Inspect the processed feature together with adjacent edges, surfaces, wall sections and functional zones.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Wedge-induced beam deviation, coating damage, edge-load fracture, seal stress and incorrect spectral material |
| Product inspection | CMM or optical comparator, autocollimator or interferometer, transmitted-wavefront test, scratch-dig inspection and spectral test |
| Application failure modes | Bubble trapping, leakage, path error, fluorescence, residue and channel blockage. |
Information Needed Before Quotation
Provide the glass grade, supplied form, dimensions, feature location, edge and surface requirements, quantity and inspection method.
RFQ inputs
- Clear aperture, material/grade, wavelength, dimensions, wedge/parallelism, flatness, surface quality, coating, pressure/vacuum, temperature and seal interface
- Band, path length, channel/port geometry, volume, fluid, pressure/flow, cleaning, seal and background limit.
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Product and Process References
References support the assigned records but do not replace a drawing-specific feasibility review or approved first article.
- Cat-i Glass Drilling Beveling and SawingCat-i Glass
- Precision Drilling and MillingVitrum Glass Group
- Abrisa Glass Machining CapabilitiesAbrisa Technologies
- JNS CNC Glass Machining, Drilling, Slotting and GroovingJNS Glass
- Processed Flat Glass technical detailsSCHOTT
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Glass Drilling
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can Glass Drilling be used for Glass Cell Window in Glass Cell Window Drilling?
Glass Drilling can be reviewed for Glass Cell Window, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Round, square, rectangular, wedged, stepped, flanged or drilled window.
Which product features affect Glass Drilling for Glass Cell Window Drilling?
For Glass Cell Window Drilling, thickness, feature size, edge distance, wall section, internal radii, tool access, datums and protected surfaces can change the accepted process route.
Are the process values on Glass Cell Window Drilling guaranteed finished-part limits?
No. For Glass Cell Window Drilling, published process references retain their material and geometry conditions; the quotation and approved drawing define the finished-part acceptance limits.
Which defects should be checked after Glass Drilling on Glass Cell Window?
For Glass Cell Window Drilling, inspect feature position and size together with chips, cracks, breakout, edge condition, scratches, contamination and adjacent-wall damage.
How should Glass Cell Window Drilling be inspected?
For Glass Cell Window Drilling, connect each critical drawing characteristic to an agreed instrument, datum, fixture condition, sampling plan and numeric acceptance limit.
What should an RFQ include for Glass Cell Window Drilling?
For Glass Cell Window Drilling, clear aperture, material/grade, wavelength, dimensions, wedge/parallelism, flatness, surface quality, coating, pressure/vacuum, temperature and seal interface Band, path length, channel/port geometry, volume, fluid, pressure/flow, cleaning, seal and background limit.