Glass Hole Drilling can be reviewed for Glass Cover, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Flat cover, display cover, domed/pressed lighting cover, LiDAR cover or equipment guard window.
How Glass Hole Drilling Applies to Glass Cover
Glass Hole Drilling can be reviewed for Glass Cover, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Flat cover, display cover, domed/pressed lighting cover, LiDAR cover or equipment guard window.
Glass Cover
Flat cover, display cover, domed/pressed lighting cover, LiDAR cover or equipment guard window
Glass Hole Drilling
Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Feature-specific approval
Tool access, wall section, edge distance, finish, datums, tolerance and inspection method must be approved for the actual drawing.
Compatibility Between the Product Geometry and Process Route
The review separates the intended operation from product-family assumptions and drawing-specific constraints.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Product geometry | Flat cover, display cover, domed/pressed lighting cover, LiDAR cover or equipment guard window |
| Typical input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Glass Cover Features That Affect the Process
Product-form records describe typical geometry and inspection needs; the supplied glass grade and drawing remain controlling inputs.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Flat cover, display cover, domed/pressed lighting cover, LiDAR cover or equipment guard window |
| Dimensions and thickness | Small sensor covers through equipment panels; provider examples include custom lighting discs and CNC panels |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Seamed/ground for concealed covers, polished or chamfered for exposed edges |
| Inspection | Cosmetic inspection, dimensions, haze/transmission, coating/print registration, impact/environmental and assembly-seal tests |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
Glass Hole Drilling References and Design Limits
Numeric values appear only when verified public process evidence is assigned. Proxy-family pages intentionally suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.76 mm | CNC drilling program |
| Maximum Thickness | >25.4 mm | CNC drilling program |
| Minimum Part Size | 50.8 x 50.8 mm | CNC program; smaller parts need dedicated holding |
| Maximum Part Size | 2286 x 1524 mm | CNC program envelope |
| Minimum Hole Diameter | 0.5 mm | SCHOTT special drilling process range 0.5-40 mm |
| Maximum Hole Diameter | 300 mm | SCHOTT standard flat-glass hole range 3.5-300 mm |
| Minimum Edge Distance | greater of 2 x glass thickness or 1.5 x hole diameter, capped at 50 mm for holes up to 60 mm | SCHOTT processed-flat-glass design table |
| Dimensional Tolerance | ±0.508 mm general; up to ±0.127 mm | JNS/Abrisa CNC drilling program |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.76 mm >25.4 mm 50.8 x 50.8 mm 2286 x 1524 mm |
| Feature size | 0.5 mm |
| Edge distance and wall section | greater of 2 x glass thickness or 1.5 x hole diameter, capped at 50 mm for holes up to 60 mm |
| Tooling and process condition | Cat-i states that its glass drilling techniques include diamond tooling and high-pressure abrasive methods.; Vitrum states that its CNC fabrication machine drills, mills, polishes and cuts holes and notches. |
| Tolerance and finish | ±0.508 mm general; up to ±0.127 mm |
| Drawing review | For Glass Hole Drilling on Glass Cover, identify the glass grade, datums, processed features, edge and surface zones, quantity and inspection method. |
Inspection Focus for Glass Cover Hole Drilling
Inspect the processed feature together with adjacent edges, surfaces, wall sections and functional zones.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Impact breakage, edge damage, thermal shock, coating/print misregistration, glare and seal leakage |
| Product inspection | Cosmetic inspection, dimensions, haze/transmission, coating/print registration, impact/environmental and assembly-seal tests |
| Application failure modes | Sensor dropout, contamination, clamp fracture, coating wear, glare and maintenance damage. |
Information Needed Before Quotation
Provide the glass grade, supplied form, dimensions, feature location, edge and surface requirements, quantity and inspection method.
RFQ inputs
- Use environment, optical band/transmission, impact target, temperature, dimensions, edge, strengthening, coating/print, seal and cosmetic criteria
- Machine function, sensor/band, environment, size/thickness, mounting, edge, coating/print and cleaning.
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Product and Process References
References support the assigned records but do not replace a drawing-specific feasibility review or approved first article.
- Cat-i Glass Drilling Beveling and SawingCat-i Glass
- Precision Drilling and MillingVitrum Glass Group
- Abrisa Glass Machining CapabilitiesAbrisa Technologies
- JNS CNC Glass Machining, Drilling, Slotting and GroovingJNS Glass
- Processed Flat Glass technical detailsSCHOTT
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Glass Hole Drilling
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can Glass Hole Drilling be used for Glass Cover in Glass Cover Hole Drilling?
Glass Hole Drilling can be reviewed for Glass Cover, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Flat cover, display cover, domed/pressed lighting cover, LiDAR cover or equipment guard window.
Which product features affect Glass Hole Drilling for Glass Cover Hole Drilling?
For Glass Cover Hole Drilling, thickness, feature size, edge distance, wall section, internal radii, tool access, datums and protected surfaces can change the accepted process route.
Are the process values on Glass Cover Hole Drilling guaranteed finished-part limits?
No. For Glass Cover Hole Drilling, published process references retain their material and geometry conditions; the quotation and approved drawing define the finished-part acceptance limits.
Which defects should be checked after Glass Hole Drilling on Glass Cover?
For Glass Cover Hole Drilling, inspect feature position and size together with chips, cracks, breakout, edge condition, scratches, contamination and adjacent-wall damage.
How should Glass Cover Hole Drilling be inspected?
For Glass Cover Hole Drilling, connect each critical drawing characteristic to an agreed instrument, datum, fixture condition, sampling plan and numeric acceptance limit.
What should an RFQ include for Glass Cover Hole Drilling?
For Glass Cover Hole Drilling, use environment, optical band/transmission, impact target, temperature, dimensions, edge, strengthening, coating/print, seal and cosmetic criteria Machine function, sensor/band, environment, size/thickness, mounting, edge, coating/print and cleaning.