Glass Disc Edge Grinding on Glass Optical Filter can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Glass Optical Filter Glass Disc Edge Grinding: Scope and Feasibility
Glass Disc Edge Grinding on Glass Optical Filter can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Glass Disc Edge Grinding
Glass Edge Grinding: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Glass Optical Filter
Wavelength/band, power density, angle, clear aperture, material, thickness, wedge, flatness, surface quality, coating and damage threshold
Drawing-defined acceptance
Published records guide planning; the approved drawing, first-article result and agreed inspection method define acceptance.
What Changes the Manufacturing Route
The service name alone is not enough. Material grade, supplied form, geometry, tolerances, protected surfaces, quantity and inspection requirements must be reviewed together.
| Review area | Project-specific basis |
|---|---|
| Part or stock form | Wavelength/band, power density, angle, clear aperture, material, thickness, wedge, flatness, surface quality, coating and damage threshold |
| Manufacturing service | Glass Edge Grinding: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Geometry and access | Provide thickness, part envelope, feature size, internal radii, edge distance, wall section, tool access, datums and protected surfaces for Glass Optical Filter Glass Disc Edge Grinding. |
| Acceptance basis | State dimensional tolerances, edge and surface acceptance, optical or sealing requirements, inspection instrument, sampling and records required. |
Glass Disc Edge Grinding References
Numeric references are shown only when the configured V4.1 process record is transferable. Proxy, drawing-review and prototype-review pages suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.813 mm | Abrisa edge grinding/polishing program |
| Maximum Thickness | 50.8 mm | Abrisa edge grinding/polishing program |
| Minimum Part Size | 19.05 x 19.05 mm | Converted from the source imperial value 0.75 x 0.75 in; the source page metric text is inconsistent |
| Maximum Part Size | 533 x 533 mm | Abrisa edge grinding/polishing program |
| Dimensional Tolerance | ±0.254 mm; up to ±0.05 mm for parts 127 x 127 mm or smaller | Abrisa edge program |
| Parallelism | ±0.0127 mm | Swift edge-finishing equipment; converted from 0.0005 in |
| Drawing item | What must be defined |
|---|---|
| Drawing revision and units | Provide the controlled 2D drawing and, for complex geometry, a matching 3D model with units and revision status. |
| Material and supplied condition | Optical, thermal, chemical or mechanical glass components within the cited grade limits |
| Feature definition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Edge and surface zones | Fine ground, beveled/chamfered and optionally blackened |
| Quantity and inspection | State prototype and production quantity, critical-to-quality characteristics, instrument, fixture condition, sampling plan and required report. |
Quality Controls for Glass Optical Filter Glass Disc Edge Grinding
Each critical characteristic should be tied to a datum, instrument, fixture condition, sampling plan and acceptance limit.
| Risk or check | Control requirement |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Laser damage, coating mismatch, wedge-induced beam steering, birefringence and contamination |
| Product inspection | Interferometry, autocollimation, scratch-dig inspection, roughness metrology and spectrophotometry |
| Acceptance method | Scratch-Dig Inspection: Compare calibrated result with the drawing, purchase order or approved test specification |
Information Needed Before Quotation
Provide enough information to separate material selection, manufacturing feasibility and finished-part acceptance.
RFQ inputs
- Wavelength/band, power density, angle, clear aperture, material, thickness, wedge, flatness, surface quality, coating and damage threshold
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected V4.1 References
These references support material, process, product or inspection planning but do not replace an approved drawing or project-specific capability review.
- SCHOTT Optical Glass Pocket Catalogmedia.schott.com
- N-ZK7 Optical GlassSCHOTT
- Abrisa Glass Machining CapabilitiesAbrisa Technologies
- Edge Grinding and PolishingSwift Glass
- Precision Drilling and MillingVitrum Glass Group
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Glass Disc Edge Grinding
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
What does the Glass Optical Filter Glass Disc Edge Grinding service include?
Glass Disc Edge Grinding on Glass Optical Filter can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Which material information is required for Glass Optical Filter Glass Disc Edge Grinding?
For Glass Optical Filter Glass Disc Edge Grinding, identify the exact glass grade, supplier or equivalent policy, supplied form, thickness, certificate requirement and relevant thermal, optical, chemical or mechanical service conditions. The current label is.
Which drawing features control feasibility for Glass Optical Filter Glass Disc Edge Grinding?
For Glass Optical Filter Glass Disc Edge Grinding, define the Glass Optical Filter envelope, thickness, holes, slots, pockets, steps, contours, radii, edge distances, wall sections, datums, protected surfaces and acceptance limits.
Are the published process values guaranteed for Glass Optical Filter Glass Disc Edge Grinding?
No. For Glass Optical Filter Glass Disc Edge Grinding, published values retain their source conditions. The quotation and approved drawing define the finished-part limits for the actual grade, thickness, geometry, quantity and inspection method.
Which defects and inspection checks matter for Glass Optical Filter Glass Disc Edge Grinding?
For Glass Optical Filter Glass Disc Edge Grinding, inspect dimensions and feature position together with chips, cracks, breakout, edge condition, scratches, pits, contamination and any optical, sealing or service-specific characteristic stated on the drawing.
What should an RFQ include for Glass Optical Filter Glass Disc Edge Grinding?
For Glass Optical Filter Glass Disc Edge Grinding, wavelength/band, power density, angle, clear aperture, material, thickness, wedge, flatness, surface quality, coating and damage threshold.