Micro Hole Glass Drilling on Machine Vision Window can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Machine Vision Window Micro Hole Glass Drilling: Scope and Feasibility
Micro Hole Glass Drilling on Machine Vision Window can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Micro Hole Glass Drilling
Micro-Hole Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Machine Vision Window
Camera/illumination band, incidence angle, aperture, thickness, wedge, flatness, surface quality, coating, cleaning and mount
Drawing-defined acceptance
Published records guide planning; the approved drawing, first-article result and agreed inspection method define acceptance.
What Changes the Manufacturing Route
The service name alone is not enough. Material grade, supplied form, geometry, tolerances, protected surfaces, quantity and inspection requirements must be reviewed together.
| Review area | Project-specific basis |
|---|---|
| Part or stock form | Camera/illumination band, incidence angle, aperture, thickness, wedge, flatness, surface quality, coating, cleaning and mount |
| Manufacturing service | Micro-Hole Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Geometry and access | Provide thickness, part envelope, feature size, internal radii, edge distance, wall section, tool access, datums and protected surfaces for Machine Vision Window Micro Hole Glass Drilling. |
| Acceptance basis | State dimensional tolerances, edge and surface acceptance, optical or sealing requirements, inspection instrument, sampling and records required. |
Micro Hole Glass Drilling References
Numeric references are shown only when the configured V4.1 process record is transferable. Proxy, drawing-review and prototype-review pages suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.25 mm | TECNISCO standard mesh-glass specification |
| Maximum Part Size | Ø150 mm | TECNISCO mesh-glass specification |
| Minimum Hole Diameter | 0.07 x 0.07 mm square hole | TECNISCO standard mesh-glass specification; square micro-hole, not circular drilling |
| Hole Diameter Tolerance | ±0.02 mm | TECNISCO standard mesh-glass specification |
| Drawing item | What must be defined |
|---|---|
| Drawing revision and units | Provide the controlled 2D drawing and, for complex geometry, a matching 3D model with units and revision status. |
| Material and supplied condition | Confirm the exact material grade, stock form, thickness and certificate requirement before process planning. |
| Feature definition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Edge and surface zones | Fine ground or polished edge with chamfer; blackened edge may reduce stray light |
| Quantity and inspection | State prototype and production quantity, critical-to-quality characteristics, instrument, fixture condition, sampling plan and required report. |
Quality Controls for Machine Vision Window Micro Hole Glass Drilling
Each critical characteristic should be tied to a datum, instrument, fixture condition, sampling plan and acceptance limit.
| Risk or check | Control requirement |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Ghost images, focus shift, distortion, stray light, contamination and clamp stress |
| Product inspection | Transmission, wedge/autocollimation, transmitted wavefront, surface quality, dimensional inspection and image-artifact test |
| Application failure modes | Ghosting, glare, distortion, focus shift, coating damage, particles and clamp-induced birefringence. |
Information Needed Before Quotation
Provide enough information to separate material selection, manufacturing feasibility and finished-part acceptance.
RFQ inputs
- Camera/illumination band, incidence angle, aperture, thickness, wedge, flatness, surface quality, coating, cleaning and mount
- Camera/illumination band, incidence angle, aperture, thickness, wedge, flatness, surface quality, coating and mount.
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected V4.1 References
These references support material, process, product or inspection planning but do not replace an approved drawing or project-specific capability review.
- Micro Hole Drilling of Soda Lime Glass by Ultrasonic Assisted Rotary ECDMnature.com
- Intermittent and Continuous Rotary Ultrasonic Machining of K9 Glassmdpi.com
- Ultrasonic Drilling of Borosilicate Glass Micro-Holesmechanika.ktu.lt
- Mesh glass standard specificationsTECNISCO
- KEYENCE Image Dimension Measurement Systemskeyence.com
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Micro Hole Glass Drilling
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
What does the Machine Vision Window Micro Hole Glass Drilling service include?
Micro Hole Glass Drilling on Machine Vision Window can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Which material information is required for Machine Vision Window Micro Hole Glass Drilling?
For Machine Vision Window Micro Hole Glass Drilling, identify the exact glass grade, supplier or equivalent policy, supplied form, thickness, certificate requirement and relevant thermal, optical, chemical or mechanical service conditions. The current label is.
Which drawing features control feasibility for Machine Vision Window Micro Hole Glass Drilling?
For Machine Vision Window Micro Hole Glass Drilling, define the Machine Vision Window envelope, thickness, holes, slots, pockets, steps, contours, radii, edge distances, wall sections, datums, protected surfaces and acceptance limits.
Are the published process values guaranteed for Machine Vision Window Micro Hole Glass Drilling?
No. For Machine Vision Window Micro Hole Glass Drilling, published values retain their source conditions. The quotation and approved drawing define the finished-part limits for the actual grade, thickness, geometry, quantity and inspection method.
Which defects and inspection checks matter for Machine Vision Window Micro Hole Glass Drilling?
For Machine Vision Window Micro Hole Glass Drilling, inspect dimensions and feature position together with chips, cracks, breakout, edge condition, scratches, pits, contamination and any optical, sealing or service-specific characteristic stated on the drawing.
What should an RFQ include for Machine Vision Window Micro Hole Glass Drilling?
For Machine Vision Window Micro Hole Glass Drilling, camera/illumination band, incidence angle, aperture, thickness, wedge, flatness, surface quality, coating, cleaning and mount Camera/illumination band, incidence angle, aperture, thickness, wedge, flatness, surface quality, coating and mount.