Glass Edge Grinding can be reviewed for Sensor Window, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Edge Grinding: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover.
How Glass Edge Grinding Applies to Sensor Window
Glass Edge Grinding can be reviewed for Sensor Window, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Edge Grinding: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover.
Sensor Window
Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover
Glass Edge Grinding
Glass Edge Grinding: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Feature-specific approval
Tool access, wall section, edge distance, finish, datums, tolerance and inspection method must be approved for the actual drawing.
Compatibility Between the Product Geometry and Process Route
The review separates the intended operation from product-family assumptions and drawing-specific constraints.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Glass Edge Grinding: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Product geometry | Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover |
| Typical input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Sensor Window Features That Affect the Process
Product-form records describe typical geometry and inspection needs; the supplied glass grade and drawing remain controlling inputs.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover |
| Dimensions and thickness | Package-scale windows through larger LiDAR covers; housing aperture and field of view govern |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Fine ground/chamfered outside clear aperture; sealing edge matched to hermetic or adhesive process |
| Inspection | Spectral/angular transmission, surface quality, dimensions/TTV, coating adhesion and environmental seal testing |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
Glass Edge Grinding References and Design Limits
Numeric values appear only when verified public process evidence is assigned. Proxy-family pages intentionally suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.813 mm | Abrisa edge grinding/polishing program |
| Maximum Thickness | 50.8 mm | Abrisa edge grinding/polishing program |
| Minimum Part Size | 19.05 x 19.05 mm | Converted from the source imperial value 0.75 x 0.75 in; the source page metric text is inconsistent |
| Maximum Part Size | 533 x 533 mm | Abrisa edge grinding/polishing program |
| Dimensional Tolerance | ±0.254 mm; up to ±0.05 mm for parts 127 x 127 mm or smaller | Abrisa edge program |
| Parallelism | ±0.0127 mm | Swift edge-finishing equipment; converted from 0.0005 in |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.813 mm 50.8 mm 19.05 x 19.05 mm 533 x 533 mm |
| Tooling and process condition | Swift states that edge grinding and profiling are supported by 3-axis and 4-axis CNC workstations. |
| Tolerance and finish | ±0.254 mm; up to ±0.05 mm for parts 127 x 127 mm or smaller Swift states that the refined edge may be a smooth matte finish or an optically clear high-gloss luster. |
| Drawing review | For Glass Edge Grinding on Sensor Window, identify the glass grade, datums, processed features, edge and surface zones, quantity and inspection method. |
Inspection Focus for Sensor Window Edge Grinding
Inspect the processed feature together with adjacent edges, surfaces, wall sections and functional zones.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Wrong band material, angular spectral shift, humidity ingress, coating damage and housing-induced stress |
| Product inspection | Spectral/angular transmission, surface quality, dimensions/TTV, coating adhesion and environmental seal testing |
| Application failure modes | Wrong spectral glass, coating shift, moisture ingress, seal fracture, fogging and housing-induced stress. |
Information Needed Before Quotation
Provide the glass grade, supplied form, dimensions, feature location, edge and surface requirements, quantity and inspection method.
RFQ inputs
- Sensor band/angle, clear aperture, substrate, thickness, wedge/flatness, coating, seal method, environment, impact and cleanliness
- Sensor type, band/angle, aperture, material, thickness, coating, seal, environment, impact and cleanliness.
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Product and Process References
References support the assigned records but do not replace a drawing-specific feasibility review or approved first article.
- Abrisa Glass Machining CapabilitiesAbrisa Technologies
- Edge Grinding and PolishingSwift Glass
- Precision Drilling and MillingVitrum Glass Group
- Valley Design Optical Polishing, Lapping, Dicing and MachiningValley Design
- SCHOTT Imaging and Sensing Material RequirementsSCHOTT
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Glass Edge Grinding
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can Glass Edge Grinding be used for Sensor Window in Sensor Window Edge Grinding?
Glass Edge Grinding can be reviewed for Sensor Window, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Edge Grinding: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Flat window, window lid, lens cap, wedged cover, coated aperture or patterned sensor cover.
Which product features affect Glass Edge Grinding for Sensor Window Edge Grinding?
For Sensor Window Edge Grinding, thickness, feature size, edge distance, wall section, internal radii, tool access, datums and protected surfaces can change the accepted process route.
Are the process values on Sensor Window Edge Grinding guaranteed finished-part limits?
No. For Sensor Window Edge Grinding, published process references retain their material and geometry conditions; the quotation and approved drawing define the finished-part acceptance limits.
Which defects should be checked after Glass Edge Grinding on Sensor Window?
For Sensor Window Edge Grinding, inspect feature position and size together with chips, cracks, breakout, edge condition, scratches, contamination and adjacent-wall damage.
How should Sensor Window Edge Grinding be inspected?
For Sensor Window Edge Grinding, connect each critical drawing characteristic to an agreed instrument, datum, fixture condition, sampling plan and numeric acceptance limit.
What should an RFQ include for Sensor Window Edge Grinding?
For Sensor Window Edge Grinding, sensor band/angle, clear aperture, substrate, thickness, wedge/flatness, coating, seal method, environment, impact and cleanliness Sensor type, band/angle, aperture, material, thickness, coating, seal, environment, impact and cleanliness.