Glass Beveling can be reviewed for Sight Glass, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Beveling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Round disc, weld-on assembly window, bolted flange disc or fused metal sight-glass component.
How Glass Beveling Applies to Sight Glass
Glass Beveling can be reviewed for Sight Glass, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Beveling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Round disc, weld-on assembly window, bolted flange disc or fused metal sight-glass component.
Sight Glass
Round disc, weld-on assembly window, bolted flange disc or fused metal sight-glass component
Glass Beveling
Glass Beveling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Feature-specific approval
Tool access, wall section, edge distance, finish, datums, tolerance and inspection method must be approved for the actual drawing.
Compatibility Between the Product Geometry and Process Route
The review separates the intended operation from product-family assumptions and drawing-specific constraints.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Glass Beveling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Product geometry | Round disc, weld-on assembly window, bolted flange disc or fused metal sight-glass component |
| Typical input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Sight Glass Features That Affect the Process
Product-form records describe typical geometry and inspection needs; the supplied glass grade and drawing remain controlling inputs.
| Product requirement | What to define |
|---|---|
| Geometry and available forms | Round disc, weld-on assembly window, bolted flange disc or fused metal sight-glass component |
| Dimensions and thickness | 30–265 mm diameter published DIN 7080 range |
| Holes, cutouts and features | Dimension holes, slots, cutouts, steps, grooves, radii and their edge distances. |
| Edge and surface zones | Controlled ground edge compatible with the armature; no uncontrolled chips in loaded zones |
| Inspection | Dimensional and edge inspection, transmitted-light visual check, certificate review and assembly pressure/leak validation |
| Packaging and handling | State cleanliness, protective film, separators, individual packing and shipping requirements. |
Glass Beveling References and Design Limits
Numeric values appear only when verified public process evidence is assigned. Proxy-family pages intentionally suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.813 mm | Abrisa edge grinding/polishing program |
| Maximum Thickness | 50.8 mm | Abrisa edge grinding/polishing program |
| Minimum Part Size | 19.05 x 19.05 mm | Converted from the source imperial value 0.75 x 0.75 in; the source page metric text is inconsistent |
| Maximum Part Size | 533 x 533 mm | Abrisa edge grinding/polishing program |
| Dimensional Tolerance | ±0.254 mm; up to ±0.05 mm for parts 127 x 127 mm or smaller | Abrisa edge program |
| Parallelism | ±0.0127 mm | Swift edge-finishing equipment; converted from 0.0005 in |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.813 mm 50.8 mm 19.05 x 19.05 mm 533 x 533 mm |
| Tooling and process condition | Cat-i states that beveling uses diamond-based tooling to grind angled surfaces into glass. |
| Tolerance and finish | ±0.254 mm; up to ±0.05 mm for parts 127 x 127 mm or smaller |
| Drawing review | For Glass Beveling on Sight Glass, identify the glass grade, datums, processed features, edge and surface zones, quantity and inspection method. |
Inspection Focus for Sight Glass Beveling Processing
Inspect the processed feature together with adjacent edges, surfaces, wall sections and functional zones.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Incorrect pressure/temperature derating, gasket point load, chemical attack, thermal shock and edge damage |
| Product inspection | Dimensional and edge inspection, transmitted-light visual check, certificate review and assembly pressure/leak validation |
| Application failure modes | Thermal shock, gasket point loading, wrong pressure derating, chemical surface attack and edge-initiated fracture. |
Information Needed Before Quotation
Provide the glass grade, supplied form, dimensions, feature location, edge and surface requirements, quantity and inspection method.
RFQ inputs
- Applicable standard, diameter, thickness, pressure, temperature, medium/concentration, armature, gasket, thermal cycle, safety protection and documentation
- Standard, diameter, thickness, sight opening, pressure, temperature, medium, armature, gasket, thermal cycle and documentation.
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Product and Process References
References support the assigned records but do not replace a drawing-specific feasibility review or approved first article.
- Cat-i Glass Drilling Beveling and SawingCat-i Glass
- Edge Grinding and PolishingSwift Glass
- Precision Drilling and MillingVitrum Glass Group
- Sydor CNC Glass MachiningSydor Optics
- Pegasus Glass Custom Tubing and RodPegasus Glass
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Glass Beveling
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Can Glass Beveling be used for Sight Glass in Sight Glass Beveling Processing?
Glass Beveling can be reviewed for Sight Glass, but the accepted route depends on glass grade, supplied form, dimensions, feature geometry, wall section, edge distance, finish and inspection method. The assigned process record notes: Glass Beveling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned product record adds: Round disc, weld-on assembly window, bolted flange disc or fused metal sight-glass component.
Which product features affect Glass Beveling for Sight Glass Beveling Processing?
For Sight Glass Beveling Processing, thickness, feature size, edge distance, wall section, internal radii, tool access, datums and protected surfaces can change the accepted process route.
Are the process values on Sight Glass Beveling Processing guaranteed finished-part limits?
No. For Sight Glass Beveling Processing, published process references retain their material and geometry conditions; the quotation and approved drawing define the finished-part acceptance limits.
Which defects should be checked after Glass Beveling on Sight Glass?
For Sight Glass Beveling Processing, inspect feature position and size together with chips, cracks, breakout, edge condition, scratches, contamination and adjacent-wall damage.
How should Sight Glass Beveling Processing be inspected?
For Sight Glass Beveling Processing, connect each critical drawing characteristic to an agreed instrument, datum, fixture condition, sampling plan and numeric acceptance limit.
What should an RFQ include for Sight Glass Beveling Processing?
For Sight Glass Beveling Processing, applicable standard, diameter, thickness, pressure, temperature, medium/concentration, armature, gasket, thermal cycle, safety protection and documentation Standard, diameter, thickness, sight opening, pressure, temperature, medium, armature, gasket, thermal cycle and documentation.