Micro Hole Glass Drilling on Sight Glass can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Sight Glass Micro Hole Glass Drilling: Scope and Feasibility
Micro Hole Glass Drilling on Sight Glass can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Micro Hole Glass Drilling
Micro-Hole Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Sight Glass
Applicable standard, diameter, thickness, pressure, temperature, medium/concentration, armature, gasket, thermal cycle, safety protection and documentation
Drawing-defined acceptance
Published records guide planning; the approved drawing, first-article result and agreed inspection method define acceptance.
What Changes the Manufacturing Route
The service name alone is not enough. Material grade, supplied form, geometry, tolerances, protected surfaces, quantity and inspection requirements must be reviewed together.
| Review area | Project-specific basis |
|---|---|
| Part or stock form | Applicable standard, diameter, thickness, pressure, temperature, medium/concentration, armature, gasket, thermal cycle, safety protection and documentation |
| Manufacturing service | Micro-Hole Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Geometry and access | Provide thickness, part envelope, feature size, internal radii, edge distance, wall section, tool access, datums and protected surfaces for Sight Glass Micro Hole Glass Drilling. |
| Acceptance basis | State dimensional tolerances, edge and surface acceptance, optical or sealing requirements, inspection instrument, sampling and records required. |
Micro Hole Glass Drilling References
Numeric references are shown only when the configured V4.1 process record is transferable. Proxy, drawing-review and prototype-review pages suppress numeric ranges.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.25 mm | TECNISCO standard mesh-glass specification |
| Maximum Part Size | Ø150 mm | TECNISCO mesh-glass specification |
| Minimum Hole Diameter | 0.07 x 0.07 mm square hole | TECNISCO standard mesh-glass specification; square micro-hole, not circular drilling |
| Hole Diameter Tolerance | ±0.02 mm | TECNISCO standard mesh-glass specification |
| Drawing item | What must be defined |
|---|---|
| Drawing revision and units | Provide the controlled 2D drawing and, for complex geometry, a matching 3D model with units and revision status. |
| Material and supplied condition | Confirm the exact material grade, stock form, thickness and certificate requirement before process planning. |
| Feature definition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Edge and surface zones | Controlled ground edge compatible with the armature; no uncontrolled chips in loaded zones |
| Quantity and inspection | State prototype and production quantity, critical-to-quality characteristics, instrument, fixture condition, sampling plan and required report. |
Quality Controls for Sight Glass Micro Hole Glass Drilling
Each critical characteristic should be tied to a datum, instrument, fixture condition, sampling plan and acceptance limit.
| Risk or check | Control requirement |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Incorrect pressure/temperature derating, gasket point load, chemical attack, thermal shock and edge damage |
| Product inspection | Dimensional and edge inspection, transmitted-light visual check, certificate review and assembly pressure/leak validation |
| Application failure modes | Thermal shock, gasket point loading, wrong pressure derating, chemical surface attack and edge-initiated fracture. |
Information Needed Before Quotation
Provide enough information to separate material selection, manufacturing feasibility and finished-part acceptance.
RFQ inputs
- Applicable standard, diameter, thickness, pressure, temperature, medium/concentration, armature, gasket, thermal cycle, safety protection and documentation
- Standard, diameter, thickness, sight opening, pressure, temperature, medium, armature, gasket, thermal cycle and documentation.
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected V4.1 References
These references support material, process, product or inspection planning but do not replace an approved drawing or project-specific capability review.
- Micro Hole Drilling of Soda Lime Glass by Ultrasonic Assisted Rotary ECDMnature.com
- Intermittent and Continuous Rotary Ultrasonic Machining of K9 Glassmdpi.com
- Ultrasonic Drilling of Borosilicate Glass Micro-Holesmechanika.ktu.lt
- Mesh glass standard specificationsTECNISCO
- SCHOTT Components for Industrial PlantsSCHOTT
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Micro Hole Glass Drilling
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
What does the Sight Glass Micro Hole Glass Drilling service include?
Micro Hole Glass Drilling on Sight Glass can be reviewed as a custom precision-glass service. Feasibility and quotation depend on the exact grade, stock form, thickness, feature geometry, protected surfaces, quantity and drawing-defined acceptance criteria.
Which material information is required for Sight Glass Micro Hole Glass Drilling?
For Sight Glass Micro Hole Glass Drilling, identify the exact glass grade, supplier or equivalent policy, supplied form, thickness, certificate requirement and relevant thermal, optical, chemical or mechanical service conditions. The current label is.
Which drawing features control feasibility for Sight Glass Micro Hole Glass Drilling?
For Sight Glass Micro Hole Glass Drilling, define the Sight Glass envelope, thickness, holes, slots, pockets, steps, contours, radii, edge distances, wall sections, datums, protected surfaces and acceptance limits.
Are the published process values guaranteed for Sight Glass Micro Hole Glass Drilling?
No. For Sight Glass Micro Hole Glass Drilling, published values retain their source conditions. The quotation and approved drawing define the finished-part limits for the actual grade, thickness, geometry, quantity and inspection method.
Which defects and inspection checks matter for Sight Glass Micro Hole Glass Drilling?
For Sight Glass Micro Hole Glass Drilling, inspect dimensions and feature position together with chips, cracks, breakout, edge condition, scratches, pits, contamination and any optical, sealing or service-specific characteristic stated on the drawing.
What should an RFQ include for Sight Glass Micro Hole Glass Drilling?
For Sight Glass Micro Hole Glass Drilling, applicable standard, diameter, thickness, pressure, temperature, medium/concentration, armature, gasket, thermal cycle, safety protection and documentation Standard, diameter, thickness, sight opening, pressure, temperature, medium, armature, gasket, thermal cycle and documentation.