Glass Disc Cutting can be reviewed for Soda Lime Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Glass Disc Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Glass Disc Cutting for Soda Lime Glass
Glass Disc Cutting can be reviewed for Soda Lime Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Glass Disc Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Soda Lime Glass
Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements
Glass Disc Cutting
Glass Disc Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data.
Drawing-defined feasibility
Final capability is reviewed against grade, supplied form, thickness, geometry, edge distance, finish, tolerance, quantity and inspection method.
How the Process and Glass Type Interact
The table separates verified process or material records from project-specific items that still require drawing review.
| Review area | Assigned technical basis |
|---|---|
| Process purpose | Glass Disc Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Material or functional basis | Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements |
| Input form | Flat sheet, blank, tube, rod or preform as applicable to the named process |
| High-risk condition | Thin, brittle, strengthened, crystalline or coated parts require grade- and geometry-specific qualification |
| Inspection basis | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
Soda Lime Glass Properties Relevant to Glass Disc Cutting
Published values retain their grade and source conditions. They are not automatic finished-part guarantees.
| Material property | Published reference |
|---|---|
| Material category | Soda-lime silicate |
| Thermal expansion | 8.3e-6 1/K (75 to 575 deg F) |
| Available forms | Sheet, plate, disc, window, tube, rod or blank where the named grade is supplied in that form |
Glass Disc Cutting References and Design Limits
Numeric values are displayed only when an exact or accepted process-family record has verified public evidence. Proxy-family pages suppress numeric ranges and remain drawing-review pages.
| Process parameter | Reference value | Applicable condition |
|---|---|---|
| Minimum Thickness | 0.508 mm | Abrisa circle-grinding program |
| Maximum Thickness | 25.4 mm | Abrisa circle-grinding program |
| Minimum Part Size | Ø6.35 mm | Outer-diameter circle-grinding reference; rings/washers also require a separately qualified inner hole |
| Maximum Part Size | Ø304.8 mm | Abrisa circle-grinding program |
| Dimensional Tolerance | ±0.254 mm; up to ±0.127 mm | Abrisa circle-grinding program |
| Design item | What must be reviewed |
|---|---|
| Thickness and part envelope | 0.508 mm 25.4 mm Ø6.35 mm Ø304.8 mm |
| Tooling and process condition | 0.01 to 0.05 mm; DISCO describes a synthetic-diamond abrasive blade with an outer diameter around 50 mm.; 50 µm to 10 mm; 50 µm to 50 mm; DISCO separates glass laser processing into continuous-wave and pulsed operation. 0.1 mm to 12 in mixed |
| Tolerance and finish | ±0.254 mm; up to ±0.127 mm |
| Drawing review | For Glass Disc Cutting on Soda Lime Glass, identify datums, critical features, edge and surface zones, coating sides, inspection method and quantity. |
Inspection Focus for Soda Lime Glass Glass Disc Cutting Feasibility Review
Acceptance should connect the drawing characteristic to a measurement method, fixture condition and stated limit.
| Review item | Project-specific focus |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitation | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Design condition | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Product design risk | Center-hole breakout, edge chips, wedge, mounting point load and thermal-gradient fracture |
| Product inspection | Diameter and thickness measurement, concentricity/runout check, edge microscopy, transmitted-light cosmetic inspection and flatness when functional |
| Acceptance method | Scratch-Dig Inspection: Compare calibrated result with the drawing, purchase order or approved test specification |
Information Needed Before Quotation
Use the drawing to define the exact material, process feature, tolerance, edge and surface acceptance criteria.
RFQ inputs
- Material grade, diameter, thickness, hole pattern, edge finish, flatness or wedge, surface quality, coating, operating temperature and packaging
- Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method
- Provide a drawing revision, material or grade, quantity, dimensions, tolerances, critical surfaces and the required inspection record.
Selected Material and Process References
References support the assigned records but do not replace an approved part drawing, first-article result or production specification.
- Properties of Soda-Lime Silica Float Glass Pilkington
- Pilkington Optifloat Clear Pilkington
- DISCO Glass Blade Dicing glass-kakou.disco.co.jp
- Custom Glass Cutting Swift Glass
- DISCO Glass Laser Cutting glass-kakou.disco.co.jp
Request a Project-Specific Glass Review
Send the drawing, material, dimensions, quantity, tolerances, surfaces and inspection requirements for feasibility review.
- Process: Glass Disc Cutting
- Material: Soda Lime Glass
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
Is Glass Disc Cutting suitable for Soda Lime Glass on Soda Lime Glass Glass Disc Cutting Feasibility Review?
Glass Disc Cutting can be reviewed for Soda Lime Glass, but the accepted route depends on the exact grade or functional material definition, supplied form, thickness, feature geometry, edge condition, surface requirement and inspection method. The assigned process record notes: Glass Disc Cutting: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. The assigned material or application record adds: Material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Which material details must be confirmed before Glass Disc Cutting for Soda Lime Glass?
For Soda Lime Glass Glass Disc Cutting Feasibility Review, material- and grade-dependent; qualify cutting, grinding, drilling, lapping and polishing against fracture and surface requirements.
Which geometry details control Glass Disc Cutting for Soda Lime Glass?
For Soda Lime Glass Glass Disc Cutting Feasibility Review, define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method.
Can published process values be used as guaranteed tolerances for Soda Lime Glass Glass Disc Cutting Feasibility Review?
For Soda Lime Glass Glass Disc Cutting Feasibility Review, no. Published values remain reference conditions. The accepted tolerance depends on the exact material grade, thickness, geometry, datum scheme, edge and surface requirement, quantity and inspection method.
Which defects and inspection checks matter after Glass Disc Cutting on Soda Lime Glass?
For Soda Lime Glass Glass Disc Cutting Feasibility Review, chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable.
What should an RFQ include for Soda Lime Glass Glass Disc Cutting Feasibility Review?
For Soda Lime Glass Glass Disc Cutting Feasibility Review, material grade, diameter, thickness, hole pattern, edge finish, flatness or wedge, surface quality, coating, operating temperature and packaging.