Glass Hole Drilling Tolerance Guide connects the drawing requirement with manufacturing control, measurement method and acceptance criteria.
What This Guide Helps You Decide
Glass Hole Drilling Tolerance Guide connects the drawing requirement with manufacturing control, measurement method and acceptance criteria.
Start with function
Define what the glass must do in the assembly, not only the part name or keyword.
Control the drawing
State material, thickness, geometry, edge finish, surfaces, tolerances, datums and inspection method.
Validate the route
Review material and process compatibility before using any published reference value as a design limit.
How to Apply Glass Hole Drilling Tolerance Guide
Start with the installed function and drawing, then confirm material, geometry, manufacturing route and inspection criteria.
1. Define the requirement
Record the installed function, environment, quantity and acceptance criteria.
2. Specify the component
Confirm the exact material or grade. Define the finished product form.
3. Review manufacturing
Glass Drilling Check thickness, holes, slots, cutouts, edge distance, radii and protected surfaces.
4. Define inspection
Connect every critical tolerance or surface note to a measurable inspection method.
Data and Engineering Considerations
Values and recommendations below retain their material grade, source and applicable conditions. Final acceptance is defined by the approved drawing and project review.
Glass Drilling
| Process item | Engineering note |
|---|---|
| Process purpose | Glass Drilling: source-backed external reference facts retained from V3.2.1; only numeric facts are counted as numeric capability data. |
| Compatible materials | Only materials explicitly qualified by the cited source or by documented process trials |
| Design considerations | Define material grade, thickness, geometry, edge distances, datum scheme, surface/edge acceptance and inspection method |
| Common defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Inspection method | Dimensional and visual inspection; add microscopy, profilometry or interferometry when the drawing requires it |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
Published Process References
| Parameter | Reference value | Applicable conditions |
|---|---|---|
| Minimum Thickness | 0.76 mm | CNC drilling program |
| Maximum Thickness | >25.4 mm | CNC drilling program |
| Minimum Part Size | 50.8 x 50.8 mm | CNC program; smaller parts need dedicated holding |
| Maximum Part Size | 2286 x 1524 mm | CNC program envelope |
| Minimum Hole Diameter | 0.5 mm | SCHOTT special drilling process range 0.5-40 mm |
| Maximum Hole Diameter | 300 mm | SCHOTT standard flat-glass hole range 3.5-300 mm |
Microscopic Edge Inspection
| Inspection item | Review note |
|---|---|
| Measured characteristic | Chips, cracks, shelling and edge finish |
| Measurement method | Microscopic Edge Inspection |
| Instrument | Calibrated optical microscope |
| Acceptance result | Compare calibrated result with the drawing, purchase order or approved test specification |
| Limitations | Method uncertainty, fixture, aperture/zone, environment, sample condition and material transparency must be stated |
What Changes the Recommended Route
| Review item | What to confirm |
|---|---|
| Installed function | Optical path, viewing, sealing, insulation, protection, fluid contact or mechanical spacing. |
| Material definition | Exact glass family, grade, supplier or approved equivalent. |
| Geometry | Thickness, OD/ID, length, holes, slots, cutouts, pockets, steps, radii, edge distances and wall sections. |
| Surface and edge | Visible surfaces, coating side, scratch-dig or roughness requirement, edge finish and allowable chips. |
| Inspection | Microscopic Edge Inspection |
| Manufacturing route | Glass Drilling with source conditions reviewed against the actual drawing. |
Risks and Inspection Controls
| Risk or control | Project review note |
|---|---|
| Process defects | Chipping, cracking, subsurface damage, dimensional error, contamination or surface defects as applicable |
| Process limitations | Public supplier values are not universal; blank numeric fields indicate that no transferable public value was verified |
| Inspection control | Microscopic Edge Inspection |
Drawing and Quotation Checklist
- Controlled PDF, DXF, DWG, STEP/STP or ZIP drawing package with revision status.
- Exact glass type or grade, acceptable equivalents and certificate requirements.
- Thickness, overall dimensions, OD/ID, holes, slots, cutouts, edgework and critical surfaces.
- Tolerance, flatness, parallelism, surface quality, roughness, cleanliness and inspection requirements.
- Application conditions including temperature, pressure or vacuum, chemical exposure, optical range, assembly and cleaning method.
- Prototype and production quantities, packaging requirements and destination country.
Published Reference Sources
These sources support the assigned material, process, product, application or inspection records. They do not replace project-specific feasibility review.
Use This Guide for a Drawing Review
Send the drawing, glass type, dimensions, quantity, tolerances, surface requirements and application conditions for a project-specific review.
- Process: Glass Hole Drilling
- Drawing or part sketch
- glass type/grade
- Thickness / part size
- Quantity
STEP/STP, DXF, DWG, PDF, IGS/IGES or ZIP.
Confidential drawing review. NDA support available on request.
Frequently Asked Questions
These answers use the material, process, product and application data assigned to this page.
What decision should a buyer make after reading Glass Hole Drilling Tolerance Guide?
Glass Hole Drilling Tolerance Guide connects the drawing requirement with manufacturing control, measurement method and acceptance criteria.
Which drawing details are essential for Glass Hole Drilling Tolerance Guide?
For Glass Hole Drilling Tolerance Guide, provide material or grade, thickness, overall dimensions, holes, slots, cutouts, edge finish, critical surfaces, tolerances, quantity and inspection requirements.
How do material and process selection interact in Glass Hole Drilling Tolerance Guide?
For Glass Hole Drilling Tolerance Guide, the material basis is the specified glass grade, while the manufacturing route is Glass Drilling. Their compatibility depends on thickness, geometry, edge distance, surface requirement and the service environment shown on the drawing.
Which product and application conditions should be confirmed for Glass Hole Drilling Tolerance Guide?
For Glass Hole Drilling Tolerance Guide, the review should connect the drawing-defined glass part with the intended application, including optical, thermal, chemical, mechanical, pressure, vacuum, cleaning and assembly conditions that affect the finished component.
Are the technical values in Glass Hole Drilling Tolerance Guide guaranteed finished-part limits?
No. For Glass Hole Drilling Tolerance Guide, published reference values retain their source and applicable conditions. ANTGLASS confirms finished-part tolerances, sizes, surface requirements and inspection methods from the actual drawing and quotation review.
What should an RFQ for Glass Hole Drilling Tolerance Guide include?
For Glass Hole Drilling Tolerance Guide, controlled PDF, DXF, DWG, STEP/STP or ZIP drawing package with revision status. Exact glass type or grade, acceptable equivalents and certificate requirements. Thickness, overall dimensions, OD/ID, holes, slots, cutouts, edgework and critical surfaces. Tolerance, flatness, parallelism, surface quality, roughness, cleanliness and inspection requirements. Application conditions including temperature, pressure or vacuum, chemical exposure, optical range, assembly and cleaning method. Prototype and production quantities, packaging requirements and destination country.